OPPO Find X10 Pro Max gets three 200 MP cameras
OPPO unveiled the Find X10 Pro Max, the first smartphone with three 200-MP cameras. The flagship also features a 2-nm MediaTek Dimensity 9600 Pro processor, an 8000 mAh battery, and enhanced video capabilities, including 8K Log recording on all three cameras.
Screen
The OPPO Find X10 Pro Max is equipped with a 6.78-inch LTPO AMOLED display with a resolution of 2772×1272 pixels. The panel adjusts the refresh rate in a range from 1 to 120 Hz, and in compatible games supports a 144 Hz mode. HDR10+ and Dolby Vision are also claimed. Peak brightness reaches 2000 nits.
The screen covers 95% of the BT.2020 color space, supports a minimum brightness of 1 nit, and features high-frequency PWM dimming at 3840 Hz. The touch layer polling rate reaches 288 Hz. A dedicated display chip P3 is used for image processing.
The panel uses new light-emitting materials: the proportion of blue light has been reduced compared to the previous generation, while the proportion of deep red light has increased.
Performance
The smartphone runs on the MediaTek Dimensity 9600 Pro, built using TSMC’s 2nm N2P process. The octa-core CPU includes two C2-Ultra cores clocked up to 4.55 GHz, three C2-Pro cores up to 4.35 GHz, and another three C2-Pro cores up to 3.1 GHz. Graphics are handled by a 12-core Mali G2-Ultra NX running at frequencies up to 1.8 GHz.
To dissipate heat, the Glacier cooling system with a large evaporative chamber is used.
OPPO also uses its own Tide Engine to manage system resources. In particular, the company has reduced the interval between consecutive 200 MP shots to 0.7 seconds.
The Find X10 Pro Max is released with 12 or 16 GB of LPDDR5X RAM and a UFS 4.1 storage unit with capacities of 256 GB, 512 GB, or 1 TB. The smartphone runs ColorOS 17 based on Android 17.
Cameras
The main feature of the Find X10 Pro Max is the first smartphone system with three 200-MP cameras:
- main camera – 200 MP, Samsung ISOCELL HPC sensor with a 1/1,3-inch format, f/1.5 aperture, CIPA 6.5-level optical image stabilization, and an advertised dynamic range of up to 17 EV;
- ultra-wide camera – 200 MP, 1/1,56-inch format sensor, f/2.2 aperture, and 124° field of view;
- periscope telephoto camera – 200 MP, 1/1,56-inch format sensor, 70 mm equivalent focal length, f/2.1 aperture, 3× optical zoom, CIPA 7.5-level image stabilization, and tele-macro photography from a distance of 10 cm. Digital zoom reaches up to 120×.
The main camera uses DeepPix technology. According to OPPO, it increases the total pixel capacity by 60% and enables capturing a 16-bit HDR in a single frame.
Color reproduction is additionally handled by a second-generation Danxia 3-MP sensor. It analyzes data across 24 spectral channels and, according to the company, delivers a dynamic range of up to 15 stops. Combined with three 200-MP rear cameras and a 50-MP front camera, the total resolution of all sensors reaches 653 MP.
The cameras were developed in collaboration with Hasselblad. The smartphone supports proprietary modes: Hasselblad Portrait, Hasselblad Master, and XPAN with a wide aspect ratio.
All three rear cameras support 8K Log recording, as well as 4K at 120 frames per second with Dolby Vision. The smartphone features hardware horizon stabilization and native support for the Blackmagic Camera app with O-Log2, Dolby Vision, and Open Gate mode. The latter utilizes nearly the entire sensor area in a 4:3 aspect ratio, leaving more room for subsequent cropping.
The Find X10 Pro Max is compatible with the Hasselblad teleconverter, which mounts over the periscope camera. With it, the equivalent focal length range reaches 230-4600 mm. OPPO also claims 20x zoom without noticeable loss of detail in good lighting, combined optical and electronic stabilization, and Dolby Vision recording at 4K 60 fps.
The smartphone supports the TILTA Khronos accessory system. It can connect ND filters, a manual focus drive, additional cooling, and an external storage device.
Another unusual accessory is the OPPO Bubble external screen. It allows you to frame shots when taking selfies and videos with the smartphone’s main cameras.
The front camera has a resolution of 50 MP and an aperture of f/2.0. It supports 4K video recording at 60 fps with Dolby Vision.
Battery and body protection
The Find X10 Pro Max received a Glacier silicon-carbon battery with a typical capacity of 8000 mAh and a nominal capacity of 7790 mAh. This is the highest-capacity battery in the history of the Find series. Its stated energy density is 867 Wh/L.
OPPO states that after five years of use, the battery should retain at least 80% of its original capacity when adhering to proprietary testing conditions.
It supports 80W SuperVOOC wired charging, 50W wireless charging, and 10W reverse wireless charging.
The chassis is certified to IP66, IP68, and IP69 standards. The smartphone also received a five-star rating from SGS Switzerland for drop and impact resistance.
Connectivity and chassis
The smartphone supports 5G, Wi-Fi 7, Bluetooth 6.2, and NFC. It features an IR transmitter, USB-C 3.2 Gen 1, an ultrasonic in-display fingerprint scanner, symmetrical stereo speakers, and the proprietary Bionic Haptic Motor Pro vibration motor. Two nano-SIM slots are provided.
The body dimensions are 161,32×76,57×8,4 mm. The Moon White version weighs 233 grams, while Warm Orange and Light Titanium weigh 235 grams. Despite the name of the latter color, it refers to the body color, not the use of titanium in the construction.
Prices and release date
Preorders for the OPPO Find X10 Pro Max are now open in China, with general sales starting on September 24.
- 12 GB + 256 GB – 6,799 yuan (≈ $1015);
- 12 GB + 512 GB – 7,499 yuan (≈ $1120);
- 16 GB + 512 GB – 7,999 yuan (≈ $1195);
- 16 GB + 1 TB – 8,999 yuan (≈ $1344).
OPPO also confirmed the international release of the Find X10 Pro Max. The date for the global launch and official prices for Europe have not yet been announced.
