
How to run GTA 6 at 4K and 120 fps
You can output GTA 6 at up to 4K and 120 fps using a capture card and a PC. The game runs on the console, while the computer adds interpolated frames to make motion smoother, increasing input latency.
What you need to output GTA 6 at 4K and 120 Hz
You’ll need a console with the game, an HDMI capture card, a Windows PC, and a TV or monitor that supports 3840 × 2160 at 120 Hz. Check that your graphics card, cable, and selected display input support this mode. TVs generally use HDMI 2.1, while a compatible DisplayPort connection also works for monitors.

Check the capture mode in the card’s specifications. The HDMI passthrough output may send a 4K, 120 Hz signal directly to the TV while the PC receives video at a lower resolution or refresh rate. For GTA 6, a stable capture at 4K and 30 or 60 fps is enough. The computer adds interpolated frames after capture. The game’s internal resolution is determined by the console version and its graphics settings.
How to connect your console and set up Veyra for GTA 6
- Connect the console to the capture card’s HDMI IN port. Connect an external card to the PC via USB with sufficient bandwidth, or install an internal card in a compatible PCIe slot. Connect the TV or monitor you’ll play on to the PC’s graphics card.
- On PS5 and PS5 Pro, go to Settings → System → HDMI and turn off HDCP. Xbox Series X|S games can generally be captured without changing protection settings. Keep the controller connected to the console.
- Select 3840 × 2160 and 120 Hz in Windows display settings. If the card struggles to capture the console’s signal at 120 Hz or with VRR enabled, turn those features off on the console and start with a 60 Hz signal. Keep the refresh rate of the screen connected to the PC at 120 Hz.
- Download Veyra 2.1.9, launch the program, and select the capture card as the source. The app requires Windows 11×64 and DirectX 12. Start at 1080p and 60 fps in SDR, preferably in NV12 format. Check the video and audio, then switch to 4K if the card and PC can handle it. HDR requires a compatible capture mode, such as 10-bit P010 with HDR10, and HDR enabled in Windows. If you lose audio through the card, select its audio input in Veyra and try stereo PCM on the console.
- If the card outputs 60 fps while GTA VI renders at 30, enable 60 → 30 capture mode or automatic duplicate-frame removal. In 2× mode, 30 unique frames become 60 fps. 4× mode adds three interpolated frames per original frame and is designed for output up to 120 fps. Start with 2×. Switch to 4× if the image remains smooth during camera turns and your graphics card has enough performance.

Veyra offers several algorithms for frame generation. NVIDIA Video Frame Generation is available on GeForce RTX 40 and 50 series cards, while support for RTX 30 in Veyra is experimental. Compatible Radeon cards have their own modes. AI-based image processing powered by DLSS 5 is enabled separately. Frame generation alone is enough to improve smoothness; it’s best to assess additional processing after setting up capture. It increases the load on the graphics card and can alter faces, lighting, and fine details.
How to make GTA VI smoother without Veyra or a capture card
In OBS Studio, add a “Video Capture Device” source, set the resolution and frame rate, then open the source’s windowed projector. Apply Lossless Scaling to that window using a fixed LSFG 2× or 4× multiplier. For 30 fps input, set the video stream that Lossless Scaling receives to 30 fps. If the preview is noticeably delayed, try disabling buffering in the OBS source properties. With compatible cards, you can use NitLink instead of OBS, with its output mode set to match the source frame rate. Another free option for direct capture and interpolation on a PC is PushFPS, based on Veyra.

To try frame generation in GTA 6 on PS5 without a capture card, launch PS Remote Play and apply Lossless Scaling to the streaming window. Remote Play’s video stream is compressed, and latency and stability depend on the network. If possible, connect both the console and PC to the router via Ethernet. If your TV supports interpolation in Game Mode, such as Game Motion Plus on some Samsung models, you can try it with the console connected directly. On compatible Samsung models, VRR must be turned off to use this feature.
How much does GTA 6 equipment cost, and how does it affect latency?
Veyra and OBS Studio are free. Lossless Scaling costs €6,89 on the European Steam store. If you already have a PC and a 120 Hz display, the capture card will be the main expense. Check whether it supports 4K HDR capture before buying.
| Capture card | PC connection | Supported capture | Price in the EU |
|---|---|---|---|
| Elgato 4K S | USB | Up to 4K at 60 fps in SDR; HDR up to 1080p at 60 fps | €159,99 |
| Elgato 4K X | USB 3.2 Gen 2 | 4K at 60 fps in SDR (NV12); 4K at 30 fps in HDR (P010) | €249,99 |
| Elgato 4K Pro | PCIe | Up to 4K at 60 fps in HDR | €299,99 |
Capturing, processing, and outputting video on a PC add latency between pressing a button and seeing the response on screen. The amount depends on the card, buffering settings, graphics card load, and display mode. At an original frame rate of 30 fps, GTA VI renders a new frame about every 33 ms. Interpolation smooths motion between those frames, but how quickly the game responds to input still depends on the console.

During fast camera turns, driving, and shooting, interpolation can leave ghosting, blur the crosshair, or distort interface elements. Drops in the original frame rate and an overloaded graphics card can cause stuttering even when the FPS counter reads high. If you notice this in 4× mode, try 2×, turn off additional processing, or lower the capture resolution.
To assess latency on your own equipment, repeat the same camera turn in GTA 6 with the console connected directly, through the capture card without interpolation, and with frame generation. Compare the smoothness of motion and how quickly the camera responds to the controller.










